Monel K500 Bolts

Monel K500 Bolts

Monel K500 Bolts is a precipitation-hardenable Nickel Bolts-copper amalgam that joins the superb erosion opposition normal for Monel 400 with the additional favorable position of more prominent quality and hardness, These enhanced properties, quality and hardness, are acquired by adding aluminum and titanium to the Nickel Bolts-copper base and by a warm preparing used to impact precipitation, ordinarily called age solidifying or maturing. At the point when in the age-solidified condition, Monel K-500 has a more noteworthy inclination toward stress-consumption splitting in a few situations than Monel 500. Combination K-500 has around multiple times the yield quality and twofold the elasticity when contrasted and composite 400. In addition, it tends to be additionally reinforced by virus working preceding precipitation solidifying. The quality of this Nickel Bolts steel combination is kept up to 1200° F however remains malleable and intense down to temperatures of 400° F. Its liquefying range is 2400-2460° F.

stainless-steel-monel-k500-manufacturer-importer-exporter-supplier-stockholder

This Nickel Bolts alloy is start safe and non-attractive to - 200° F. Be that as it may, it is conceivable to build up an attractive layer on the outside of the material amid handling. Aluminum and copper might be specifically oxidized amid warming, leaving an attractive Nickel Bolts rich film outwardly. Pickling or Monel K-500 Barsbright plunging in corrosive can evacuate this attractive film and reestablish the non-attractive properties.

Corrosion Resistant Monel K-500 The corrosion opposition of compound K-500 is generously comparable to that of amalgam 400 aside from that when in the age-solidified condition, Nickel Bolts composite K-500 has a more noteworthy inclination toward stress-consumption splitting in a few situations. Monel K-500 has been observed to be impervious to a harsh gas condition. The mix of low erosion rates in high-speed burn water and high quality make combination K-500 especially appropriate for shafts of diffusive siphons in marine administration. In stale or moderate moving ocean water, fouling may happen pursued by setting however this setting backs off after a genuinely quick introductory assault.

Monel K-500 is promptly created by standard business techniques. Welding compound K-500 is best practiced by the gas-tungsten-circular segment welding process. It is prescribed that Monel K-500 be toughened when it is welded and that any weldments be pressure eased before maturing. Heavy machining of this alloy is best practiced when the material is in the tempered condition or hot-worked and extinguished condition. Age-solidified material anyway can be complete machined to close resiliences and fine wraps up. Along these lines, the prescribed practice is to machine marginally larger than usual, age-solidify, at that point completion to estimate. Amid maturing, a slight changeless constriction happens, however little warpage happens in light of the low temperatures and moderate cooling rates included.

 

Monel K500 Bolts Specifications

Material : Monel K500
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.

 

Types of Monel 400 Bolts

Monel Hex Head Bolt Monel Alloy Hex Head Bolt
Monel Hex Head Bolt
Monel K500 Hex Head Bolt
Monel Square Bolt Monel Alloy Square Bolt
Monel Square Bolt
Monel K500 Square Bolt
Monel U Bolt Monel Alloy U Bolt
Monel U Bolt
Monel K500 U Bolt
Monel Eye Bolt Monel Alloy Eye Bolt
Monel Eye Bolt
Monel K500 Eye Bolt
Monel T Bolt Monel Alloy T Bolt
Monel T Bolt
Monel K500 T Bolt
Monel Hex Bolt Monel Alloy Hex Bolt
Monel Hex Bolt
Monel K500 Hex Bolt
Monel Lag Bolt Monel Alloy Lag Bolt
Monel Lag Bolt
Monel K500 Lag Bolt
Monel Counter sunk Bolt Monel Alloy Counter sunk Bolt
Monel Counter sunk Bolt
Monel K500 Counter sunk Bolt

 

What are the characteristics of Monel K500 Bolts ?

Corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidizing mineral acids, salts and alkalis.
Excellent resistance to high velocity sea water
Resistant to a sour-gas environment
Excellent mechanical properties from sub-zero temperatures up to about 480C
Non-magnetic alloy

Applications of Monel K500 Bolts

Sour-gas service applications
Oil and gas production safety lifts and valves
Oil-well tools and instruments like drill collars
Oil well industry
Doctor blades and scrapers
Chains, cables, springs, valve trim, fasteners for marine service
Pump shafts and impellers in marine service

ASTM Specifications of Monel K500 Bolts

Specifications ASTM B 865-04 ASME SB 865-04
Standard DIN, ASTM, BS and all International Standards
Length 3 mm to 200 mm
Size M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.

 

Chemical Properties

Monel K500 Bolts Ni C Al Mn Si Fe Cu S Ti Cr
63.0 min 0.25 max 2.3 – 3.15 1.5 max 0.5 max 05 – 2 27.0 – 33.0 0.010 max 0.35 – 0.85

 

Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.44 g/cm3 1350 °C (2460 °F) Psi – 1,15,000 , MPa – 790 Psi – 1,60,000 , MPa – 1100 20 %

 

Equivalent Grades for K500 Monel Bolt/Nut

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Monel K500 Bolts N05500 2.4375

 

COATINGS

 

OUR SUMMARY :
Review Date
Reviewed Product
Monel K500 Bolts
Author Rating

 

Domestic Area


Our Export

Get a Quote

Request A Quote